- Junk paper, magazines, newspaper, etc.
- a stick: wooden skewer or 3.5 mm knitting needle or any kind of equivalent stick
- “molds” like plastic tubes to form the rings, a glue stick or a lip balm can do the job (you should be able to pass your finger into the ring), for the handle, you need a bigger one, a jar or a bottle for example
- white liquid glue
- cutting tool (knife, scissor, etc.)
- clamps or clothe pins or anything similar (optionnal, you may need them when you attach the sides to the bottom or together).
- La corbeille finie
- Les ligatures donnent de la rigidité à la corbeille.
The rings and the handles are made with straws of paper.
First you need to make the straws. Cut the paper in strips.
Roll the paper using the stick. Begin at an angle, until the end of the strip. You will only have a corner to glue.
- Fin du tube
- Il ne doit y avoir qu’un petit coin à coller pour un tube bien droit.
Take of the stick and make other straws. You need a lot of straws.
To make a longer straw: glue a straw and insert it into another straw.
The rings are made with two straws. Flatten them, then roll them around the small tube gluing as they go along. Let them dry.
- Lot de rondelles
The handles are made with 3 or 4 straws rolled around the bigger “mold”.
- Les anses de la corbeille
- Deux rondelles de papier plus larges que les autres pour glisser la main.
As the rings are not perfectly equal, their sizes vary, the best way it to make a series of them. Then to align the necessary number of rings to reach the length and the width. For example, for this basket:
- bottom: 25 cm x 23 cm, I needed 8 rings for the length and 7 for the width: 8x7 = 56.
- longer sides: 13 cm x 25 cm, 4 x 8 rings twice = 64.
- smaller sides: 13 cm x 23 cm, 4 x 7 rings twice = 56
Total: 176 rings.
- How to determine the number of rings
The rings are glued together and joined with a paper ligature.
To make the ligatures, cut the straws in half and flatten them. You will need something like the same amount of ligatures than the one of rings.
Glue and roll them around two rings. Each ring has 4 ligatures, except the rings of the tops of the sides.
- Un quatuor de rondelles
- Chaque rondelle a quatre ligatures.
Begin by the bottom. I suggest to join series of 2 or 4 rings. That will give time to dry and make the work easier.
- Le fond de la corbeille
- Les rondelles réunies par des ligatures me font penser aux délicats motifs des moucharabiehs.
Once the bottom made, do the same work for the sides. Join one side to the bottom, then another side. Join these two sides together, repeat for the other sides.
This will be more easy to do if all the parts are dried.
You want them to be free to move. Protect them with plastic, that way, the glue will not stick them.
Join it to the basket with a straw like you did for the rings.
When it is perfectly dried, remove the plastic.
- Vue sur la poignée
- L’anse de la poignée reste mobile grâce à la liaison avec une ligature lâche mais solide.
You are done!
I like this look, so I did not make another finishing. But you can paint it, varnish it, or even (I did not try though) wax it or add other embellishment you want.
Just a tip: if you want the handles with another colour than the basket, paint them before attaching them to the basket.